Previous Image Index Page Next Image

311 - Abstract Art #1

           
   
October 2015 - This was actuall made with my lathe and a table saw from a piece of wood 6.75" wide and 12" tall and .75" thick. The wood was placed on my lathe with my wide lathe jaws and then I turned 10 circles in the centre of the piece. After that I cut the piece in half and from each half starting at the centre, I cut out 4 pieces .75" wide leaving the 5th piece about .35" wide. The pieces were glued together in a symetrical fashion, then sanded and varnished.