Electrical Division
Combination Phase Converter/ Motor Controller
Power Factor Improvement Capacitors
Threaded Pipe Nipple Division
Combination Phase Converter/Motor Controller Phase Conversion Systems
Willett Manufacturing Ltd. is a pioneer in oilfield phase conversion. We developed our Combination Phase Converter to provide dependability under the harshest conditions.
The combination Phase Converter/Motor Controller is ideally suited for pump jack applications. The converter enables single-phase power to operate any type of three-phase motor regardless of horsepower and speed, and under continuous or intermittent duty. Torque comparable to those of three-phase motors on three-phase lines is achieved using this conversion method.
Irrigation pumps, Oilfield recycling pumps, and Salt-water disposals are other applications that use a Combination Phase Converter/Motor Controller.
Why use Electricity?
Power remains the least expensive and most efficient form of energy. The cost of total electrification is less than the cost of the gas motor that would be used in this application.
Electricity also allows for a far more desirable type of motor. The simple construction of the three-phase motor reduces your maintenance cost and downtime considerably. It also provides you with a host of new control options, such as limit, pressure and vibration switches, as well as automatic - timed, programmable controls, etc.
Why use the Converter/Motor Controller Combination?
Three-phase motors are simpler in construction, therefore less costly, and more efficient and maintenance free than their single-phase counterparts. More importantly, single-phase motors do not develop the starting torque required for oilwell pumping use. The CEMA design D 480VAC triple horsepower rated TEFC three-phase motor is designed with high starting torque and high slip for the oilfield application.
Single-phase is a common power source. If this is currently available to you, conversion removes the necessity of running and maintaining a costly three-phase distribution network.
Sizing
| 230 Volt Model Number |
Maximum Horsepower | 460 Volt Model Number |
Maximum Horsepower |
| CBPCC24003 | 3 | CBPCC48005 | 5 |
| DBPCC24008 | 7.5 | DBPCC48010 | 10 |
| EBPCC24010 | 10 | EBPCC48020 | 20 |
| FCPCC24015 | 15 | EBPCC48025 | 25 |
| FCPCC24020 | 20 | EBPCC48030 | 30 |
| FCPCC24030 | 30 | FCPCC48040 | 40 |
| GCPCC24040 | 40 | FCPCC48050 | 50 |
| HCPCC24060 | 60 | FCPCC48060 | 60 |
| RPCC24003 | Recycled Pump | GCPCC48075 | 75 |
| HCPCC480100 | 100 | ||
| RPCC48005 | Recycled pump |
Features
- Polemount, weatherproof enclosure.
- Fast-trip overload protection.
- Automatic time delay restart after power failures.
- Lightning protection.
- Overcurrent protection.
- Good power factor.
- Easy installation.
- Fused low voltage (120V) control circuit.
- Replaceable Phasor insert.
- Components operable from the exterior.
- Entrance with power OFF only.
- Grounding lugs inside and outside of enclosure.
- Terminals for connection of pressure, vibration switches, etc.
- Plenty of space for easy servicing and heat dissipation.
- Wiring diagrams, heater and capacitor connection charts provided on inside of enclosure door.
Options
- Fuse or breaker disconnect.
- Heat tape receptacles.
- Programmable electronic time clock.
- 240, 480, and 600V models
- Special irrigation control circuitry.
- Wallmount enclosure.
- Oil and Dust tight enclosures.
- Phase failure protection.